How do I stop my Doc Martens from breaking in blisters? (2023)

How do you make Dr. Martens not give you blisters?

Wear thick socks in your Dr.

But they will also help stretch out your shoes a little bit so you can break them in more easily. Be sure to put on a pair of thick socks whenever you're wearing your Dr. Martens and this will help prevent blisters.

Wear thick socks and keep your laces tight

Keep your laces tight to encourage the boot to mould to your foot and avoid rubbing. Grab some Double Doc socks, created to help break in a pair of Docs with extra padding and blister protection.

Unfortunately there is no sure fire way to break in your Doc Martens quickly. The best way to break them in as quickly as possible is to wear them as much as you can. Wear them around the house, on walks to the shop and anywhere else you can. The more you wear them, the quicker they'll break in.

On average, it takes 3-6 weeks to fully break in your docs. It can be sped up by using heat techniques or wearing them with socks to increase the break in period. However, while they may be wearable, the full break in period will come at around 3 weeks.

Never soak your boots in water, this will make the stitching disintegrate over time. Never use Olive Oil to polish. Don't use Vaseline as it will make them greasy.

Dr.

Martens SoftWair insoles can serve as a fitting replacement for your original inserts. The build features memory foam for cushioning with perforations to promote air circulation and keep your feet cool.

The inner lining of Doc Martens is made of an abrasive material that rubs against the foot and creates blisters. Removing the insole takes some of the friction away and helps prevent blisters. It's still best to wear thick socks to prevent blisters around the ankle.

In general, remember, Dr. Martens boots and shoes run true to size (probably half a size down from your sneakers) and aren't as big as you may imagine. The exception is the 1460s, Jadons, and Chelseas, which need to be sized down about a whole size from your sneaker.

In order to defend themselves against copycats, Airwair, the company behind Dr. Martens, registered a special trademark: a so-called position mark. A position mark protects the specific way in which the trademark is applied to the product. In this case yellow stitching on the edge of the shoe.

How Long Does It Take to Break in Doc Martens Fully? For most models, the break-in time is between three and six weeks. The break-in period might take a few days to a few weeks. Applying heat treatments or wearing them with socks might help speed up the break-in process.

How do you soften Dr. Martens fast?

Martens recommends purchasing its socks, heel pads, and balm to hasten the process. The balm is supposed to soften the leather and help them break in quicker, while the heel pads and socks will prevent blisters. The company also recommends using aluminum soda cans to stretch the uppers in place of your ankles and feet.

Doc Martens are comfortable for work as they are designed for comfort and endurance. Their super comfortable cushioned soles make them easy to wear all day. They feature a chunky tread for excellent grip when walking whilst on shift, making them ideal work boots.

Dr. Martens fit true to size, and they are great for wide feet. If you do have narrow feet, you may want to consider sizing down. If you are struggling with wearing them whilst you break them in, stick a sanitary pad around the heel to avoid getting blisters.

Softening your Docs (or any hard, smooth leather boots) is easy when you do it right. You really must get the right size. If they're too small or too large they'll always hurt your feet, no matter how hard you try to break them in.

#1 ADD A COMFY BARRIER WITH SOCKS

Double Docs Socks are designed to give you a little extra protection in key friction points, like the heel, ankle and arch. You might find they make a world of difference during those first few days.

Wonder Balsam is Dr. Martens unique blend of coconut oil, lanolin, and beeswax. The natural ingredients clean and protect leather to keep it soft and supple. Wonder Balsam protects against water, liquid and salt marks.

Most Doc Martens will have a high degree of water resistance. So if you're walking through puddles or you're caught in a drizzle, your Doc Martens should be fine under these lighter conditions. However, if you're looking to wade through rivers in your 1460s, you're going to end up with wet feet and damaged leather.

Doc Marten heels can be very uncomfortable and often the first place to give you a blister. Wearing two pairs of socks with your shoes or boots will help soften the heel area as well as any other area which may be tight cause prevent blisters.

Generally, Dr Martens fit true to size, so we'd advise getting the size you usually are. However, Dr Martens can differ in size dependant on the style you are buying. The classic boots can sometimes fit a little big so if you're in between sizes, consider going down a size or getting an insole.

Yes! Since Docs are bulky, tight pants elongate the legs and emphasize the shoes, making them really stand out. So tuck your skinny jeans into the boot or cuff them off at the top.

How do I stop my boots from giving me blisters?

We offer whole sizes only. If you are a half size, we recommend going down to the nearest size. Fit may vary based on style.

Doc Martens 1460 boots do run big as they are a little wider than the other Doc Martens styles. It's recommended that you size down if you are an in-between size. If you are a whole size purchase your correct size and expect there to be a little extra room for thick socks.

Ultimately, the Made in England is a better boot that will last longer and be more comfortable after a rougher break in. As to whether that's worth the $80 more they cost, that's up to you. You'll just have to look into your heart and see what it screams at you.

Martens, also commonly known as Doc Martens, Docs or DMs, is a German-founded British footwear and clothing brand, headquartered in Wollaston in the Wellingborough district of Northamptonshire, England.

Doc Martens last between 5 and 20 years, depending on their level of use, care and how they are stored. If the leather is properly cared for and soles replaced they could potentially last even longer.

The Lasting

Our PVC welt system is what makes Dr. Martens unique. The welt is stitched around the upper and then melted together without glue so it can't become unstuck.

Blowdryer Technique- Put on your double socks, tug on your boots, and turn your blow dryer on them. I know, I know; very weird request. But by applying heat via the blowdryer to your boots, it will help them be more pliable while you stretch them out and break them in.

Longtime Dr Martens fans will be pleased to know the boots retain their cult status in 2022. The pumped up Jadons in particular – which boast an “empowering” air-cushioned sole – are ideal for those who prefer their grungy staples with added height.

Can you wear Doc Martens in the snow? Yes, you can wear Doc Martens in the snow. The traction on the sole isn't great on ice and the leather is quite thin and prone to waterlogging, so it helps to treat your boots with a waterproofing agent like mink oil and to wear a thick pair of wool socks.

Should you drive in Doc Martens?

Clumpy shoes

Big boots like Dr Martens or wellies can accidentally cover the brake and accelerator at once, so maybe not best for driving.

Massaging your footwear with your hands will simulate the effect your feet have on the leather when you first start stomping around. The more you work it, the more the leather will soften.

Unfortunately, Dr. Martens aren't available in half sizes and the brand recommends that to get your true to size fit, you should size down to your closest whole size, rather than sizing up.

Will they ever stretch over time? Yes, there are ways to stretch your doc martens bigger. They will be stretched over time but only when you wear them regularly for 10 minutes 2–3 times a day with extra thick socks. Image Source: Google.